|
MOP SINKS
|
|
Florestone
Model 5
Terrazzo Mop Base
Architect’s
Specifications
Furnish and install mop base as manufactured by Florestone.
Shoulder shall be not less than 8" high inside and not
less than 1l" wide.
Drain body shall be brass, cast integral and shall provide
for a non-caulked connection (lead caulked optional) not
less than one inch deep to a two or three inch pipe (specify
2" or 3"). Mop sinks with 3" drains are
supplied with a rubber seal for use on ABS, PVC or steel
pipe. Base shall be manufactured of tan and white marble
chips cast in white portland cement to produce a compressive
strength of not less than 3000 PSI, seven days after
casting. Terrazzo surface shall be ground and polished with
all air holes and/or pits to be grouted and excess removed
and sealed to resist stains and moisture. Base will be
reinforced with 16 gauge wire. Stainless steel grid
standard.
Note:
|
Specify 2" or 3" drain size (3"
standard).
|
Dimensions may vary ± ¼ inch. Please check
unit before installation.
|
|
|
|
Note: Terrazzo is not designed to be used with anything
that is over 130 degrees Fahrenheit.
|
A
|
B
|
HT.
|
C
|
D
|
E
|
WT.
|
|
|
24" |
24" |
10" |
12" |
12" |
12" |
221 |
|
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
|
CAD Drawings are compressed in zip format (.zip)
|
Model PDF
Installation PDF